|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
NC7SB3157, FSA3157 -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch September 2008 NC7SB3157, FSA3157 Low-Voltage SPDT Analog Switch or 2:1Multiplexer / De-multiplexer Bus Switch Features Useful in Both Analog and Digital Applications Space-Saving, SC70 6-Lead Surface Mount Package Ultra-Small, MicroPakTM Leadless Package Low On Resistance: <10 on Typical at 3.3V VCC Broad VCC Operating Range: 1.65V to 5.5V Rail-to-Rail Signal Handling Power-Down, High-Impedance Control Input Over-Voltage Tolerance of Control Input to 7.0V Break-Before-Make Enable Circuitry 250MHz, 3dB Bandwidth Description The NC7SB3157 / FSA3157 is a high-performance, single-pole / double-throw (SPDT) analog switch or 2:1 multiplexer / de-multiplexer bus switch. The device is fabricated with advanced sub-micron CMOS technology to achieve high-speed enable and disable times and low on resistance. The break-beforemake select circuitry prevents disruption of signals on the B Port due to both switches temporarily being enabled during select pin switching. The device is specified to operate over the 1.65 to 5.5V VCC operating range. The control input tolerates voltages up to 5.5V, independent of the VCC operating range. Ordering Information Part Number NC7SB3157P6X NC7SB3157L6X FSA3157P6X FSA3157L6X Top Mark B7A BB B7A BB Eco Status RoHS RoHS RoHS RoHS Package Description 6-Lead, SC70, EIAJ SC88, 1.25mm Wide Package 6-Lead, MicroPak 1.0mm Wide Package 6-Lead, SC70, EIAJ SC88, 1.25mm Wide Package 6-Lead, MicroPak 1.0mm Wide Package Packing Method 3000 Units on Tape and Reel 5000 Units on Tape and Reel 3000 Units on Tape and Reel 5000 Units on Tape and Reel For Fairchild's definition of "green" Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. MicroPakTM is a trademark of Fairchild Semiconductor Corporation. (c)2006 Fairchild Semiconductor Corporation NC7SB3157, FSA3157 Rev. 1.0.3 www.fairchildsemi.com NC7SB3157, FSA3157 -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch Logic Symbol B1 S B0 A Connection Diagrams Figure 1. Logic Symbol 2. Pin Assignments SC70 Analog Symbol B1 GND S VCC A B0 Figure 3. Analog Symbol Figure 4. Pin One Orientation Note: Orientation of top mark determines pin one location. Read the top product code mark left to right and pin one is the lower left pin (see Figure 4). Function Table Input (S) Logic Level Low Logic Level High Function B0 Connected to A B1 Connected to A B1 1 6 S VCC A Pin Descriptions Pin Names A, B0, B1 S GND 2 5 Description Data Ports Control Input Figure 5. Pad Assignments for MicroPakTM B0 3 4 (c) 2006 Fairchild Semiconductor Corporation NC7SB3157, FSA3157 Rev. 1.0.3 2 www.fairchildsemi.com NC7SB3157, FSA3157 -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol VCC VS VIN IIK IOUT ICC/IGND TSTG TJ TL PD ESD Supply Voltage Parameter DC Switch Voltage(1) DC Input Voltage(1) DC Input Diode Current at VIN < 0V DC Output Current DC VCC or Ground Current Storage Temperature Range Junction Temperature Under Bias Junction Lead Temperature (Soldering, 10 seconds) Power Dissipation at +85C Human Body Model, JESD22-A114 Min. -0.5 -0.5 -0.5 Max. +7.0 VCC +0.5 +7.0 -50 128 100 Unit V V V mA mA mA C C C mW V -65 +150 +150 +260 180 4000 Note: 1. The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to absolute maximum ratings. Symbol VCC VIN VIN VOUT TA tr, tf JA Parameter Supply Voltage Operating Control Input Voltage(2) Switch Input Output Voltage(2) Voltage(2) Control Input VCC = 2.3V-3.6V Control Input VCC = 4.5V-5.5V Min. 1.65 0 0 0 -40 0 0 Max. 5.50 VCC VCC VCC +85 10 5 270 Unit V V V V C ns/V ns/V C/W Operating Temperature Input Rise and Fall Time Thermal Resistance, SC70 Note: 2. Control input must be held HIGH or LOW; it must not float. (c) 2006 Fairchild Semiconductor Corporation NC7SB3157, FSA3157 Rev. 1.0.3 3 www.fairchildsemi.com NC7SB3157, FSA3157 -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch DC Electrical Characteristics Symbol Parameter High Level Input Voltage Low Level Input Voltage Input Leakage Current Off State Leakage Current 0 VIN 5.5V 0 A, B VCC VIN = 0V, IO = 30mA VIN = 2.4V, IO = -30mA VIN = 4.5V, IO = -30mA RON Switch On Resistance(3) VIN = 0V, IO = 24mA VIN = 3V, IO = -24mA VIN = 0V, IO = 8mA VIN = 2.3V, IO = -8mA VIN = 0V, IO = 4mA VIN = 1.65V, IO = -4mA ICC Quiescent Supply Current; All Channels On or Off Analog Signal Range IA = -30mA, 0 VBn VCC RRANGE On Resistance Over IA = -24mA, 0 VBn VCC Signal Range (3, 7) IA = -8mA, 0 VBn VCC IA = -4mA, 0 VBn VCC IA = -30mA, VBn = 3.15 RON On Resistance Match BetweenChannels(3, 4, 5) IA = -24mA, VBn 2.1 IA = -8mA, VBn = 1.6 IA = -4mA, VBn = 1.15 IA = -30mA, 0 VBn VCC Rflat On Resistance Flatness(3, 4, 6) IA = -24mA, 0 VBn VCC IA = -8mA, 0 VBn VCC IA = -4mA, 0 VBn VCC VIN = VCC or GND IOUT = 0 5.5 1.65 2.3 3.0 Conditions VCC (V) TA = +25C Min. Typ. Max. TA = -40C to +85C Min. 0.75 VCC 0.7 VCC Units Max. V 0.25 VCC 0.3 VCC 1 1 7.0 12.0 15.0 9.0 20.0 12.0 30.0 20.0 50.0 V A A VIH VIL IIN IOFF 1.65 - 1.95 0.75 VCC 2.3 - 5.5 1.65 - 1.95 2.3 - 5.5 0 - 5.5 1.65 - 5.5 4.5 0.05 0.05 3.0 5.0 7.0 4.0 10.0 5.0 13.0 6.5 17.0 0.7 VCC 0.25 VCC 0.3 VCC 0.1 0.1 7.0 12.0 15.0 9.0 20.0 12.0 30.0 20.0 50.0 1 10 A VCC 4.5 3.0 2.3 1.65 4.5 3.0 2.3 1.65 5.0 3.3 2.5 1.8 0 VCC 0 VCC 25.0 50.0 100 300 V 0.15 0.2 0.5 0.50 6.0 12.0 28.0 125 Notes: 3. Measured by the voltage drop between A and B pins at the indicated current through the switch. On resistance is determined by the lower of the voltages on the two (A or B Ports). 4. Parameter is characterized, but not tested in production. 5. RON = RON max - RON minimum measured at identical VCC, temperature, and voltage levels. 6. Flatness is defined as the difference between the maximum and minimum value of on resistance over the specified range of conditions. 7. Guaranteed by design. (c) 2006 Fairchild Semiconductor Corporation NC7SB3157, FSA3157 Rev. 1.0.2 4 www.fairchildsemi.com NC7SB3157, FSA3157 -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch AC Electrical Characteristics Symbol Parameter Conditions VCC (V) 1.65 - 1.95 tPHL, tPLH Propagation Delay Bus-to-Bus(8) VI = OPEN 2.3 - 2.7 3.0 - 3.6 4.5 - 5.5 1.65 - 1.95 tPZL, tPZH Output Enable Time Turn-On Time (A to Bn) VI = 2 x VCC for tPZL VI = 0V for tPZH 2.3 - 2.7 3.0 - 3.6 4.5 - 5.5 1.65 - 1.95 tPLZ, tPHZ Output Disable Time Turn-Off Time (A Port to B Port) VI = 2 x VCC for tPLZ VI = 0V for tPHZ 2.3 - 2.7 3.0 - 3.6 4.5 - 5.5 1.65 -1.95 tB-M Break-Before-Make Time(9) 2.3 - 2.7 3.0 - 3.6 4.5 - 5.5 Q OIRR Xtalk BW THD Charge Injection(9) Off Isolation(10) Crosstalk -3dB Bandwidth Total Harmonic Distortion(9) CL = 0.1nF, VGEN = 0V, RGEN = 0 RL = 50, f = 10MHz RL = 50, f = 10MHz RL = 50 RL = 600, 0.5 VPP, f = 600 Hz to 20 KHz 5.0 3.3 1.65 - 5.5 1.65 - 5.5 1.65 - 5.5 5.0 7.0 3.5 2.5 1.7 3.0 2.0 1.5 0.8 0.5 0.5 0.5 0.5 7.0 3.0 -57.0 -54.0 250 .011 TA = -40C to Figure +85C Units Number Min. Typ. Max. Min. Max. TA = +25C 3.5 1.2 0.8 0.3 23.0 13.0 6.9 5.2 12.5 7.0 5.0 3.5 7.0 3.5 2.5 1.7 3.0 2.0 1.5 0.8 0.5 0.5 0.5 0.5 pC dB dB Figure 15 Figure 16 Figure 17 ns Figure 14 3.5 1.2 0.8 0.3 24.0 14.0 7.6 5.7 13.0 7.5 5.3 3.8 ns Figure 12 Figure 13 ns Figure 12 Figure 13 ns Figure 12 Figure 13 MHz Figure 20 % Notes: 8. This parameter is guaranteed by design but not tested. The bus switch contributes no propagation delay other than the RC delay of the on resistance of the switch and the 50pF load capacitance, when driven by an ideal voltage source (zero output impedance). 9. Guaranteed by design. 10. Off Isolation = 20 log10 [VA / VBn]. Capacitance TA = +25C, f = 1MHz. Capacitance is characterized, but not tested in production. Symbol CIN CIO-B CIOA-ON Parameter Control Pin Input Capacitance B Port Off Capacitance A Port Capacitance When Switch Is Enabled Conditions VCC = 0V VCC = 5.0V VCC = 5.0V Typ. 2.3 6.5 18.5 Max. Units pF pF pF Figure Number Figure 18 Figure 19 (c) 2006 Fairchild Semiconductor Corporation NC7SB3157, FSA3157 Rev. 1.0.2 5 www.fairchildsemi.com NC7SB3157, FSA3157 -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch Typical Characteristics 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 1 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 1 VCC = 1.65V VCC = 5.5V Off Isolation (dB) 10 100 1000 Off Isolation (dB) 10 100 1000 Frequency (MHz) Frequency (MHz) Figure 6. Off Isolation, VCC = 1.65V Figure 7. Off Isolation, VCC = 5.5V 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 1 VCC = 1.65V 0 -10 -20 -30 -40 -50 -60 -70 -80 -90 -100 -110 -120 1 VCC = 5.5V Crosstalk (dB) 10 100 1000 Crosstalk (dB) 10 100 1000 Frequency (MHz) Frequency (MHz) Figure 8. Crosstalk, VCC = 1.65V Figure 9. Crosstalk, VCC = 5.5V 0 -1 -2 Gain (dB) Gain (dB) CL = 0pF VCC = 1.65V 0 -1 -2 -3 -4 -5 -6 -7 -8 1 10 100 1000 1 10 100 1000 Frequency (MHz) Frequency (MHz) CL = 0pF VCC = 5.5V -3 -4 -5 -6 -7 -8 Figure 10. Bandwidth, VCC = 1.65V Figure 11. Bandwidth, VCC = 5.5V (c) 2006 Fairchild Semiconductor Corporation NC7SB3157, FSA3157 Rev. 1.0.2 6 www.fairchildsemi.com NC7SB3157, FSA3157 -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch AC Loading and Waveforms VI FROM OUTPUT UNDER TEST RU CL RD Notes: Input driven by 50 source terminated in 50 CL includes load and stray capacitance Input PRR = 1.0 MHz; tW = 500 ns Figure 12. AC Test Circuit tr = 2.5ns 90% 90% 50% tr = 2.5ns VCC tr = 2.5ns 90% 90% 50% tr = 2.5ns VCC Control Input 10% 50% 10% Switch Input 10% GND tPLZ VTRI 50% tPZL 10% tW tPLH tPHL GND Output VOH 50% VOL+0.3V VOL tPHZ VOH Output 50% 50% tPZH VOL Output 50% VOH-0.3V VTRI Figure 13. AC Waveforms VIN B0 A B1 S RL CL VOUT Logic Input VOUT Logic Input tD 0.9 x VOUT Figure 14. Break-Before-Make Interval Timing (c) 2006 Fairchild Semiconductor Corporation NC7SB3157, FSA3157 Rev. 1.0.3 7 www.fairchildsemi.com NC7SB3157, FSA3157 -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch AC Loading and Waveforms (continued) RGEN VGE BN S A VOUT RL 1M CL 100pF Logic Input VOUT OFF ON OFF VOUT Logic Input Q = (VOUT)(CL) Figure 15. Charge Injection Test 10nF 10nF Signal Generator 0dBm 50 A VCC S Logic Input 0V or VIH B0 VCC B1 S GND 50 A 50 Analyzer 50 BN GND Analyzer Figure 16. Off Isolation Figure 17. Crosstalk 10nF Capacitance Meter f = 1MHz 10nF A Capacitance Meter f = 1MHz BN VCC S GND Logic Input 0V or VCC A VCC S Logic Input 0V or VCC BN GND Figure 18. Channel Off Capacitance Figure 19. Channel On Capacitance 10nF Signal Generator 0dBm Logic Input 0V or VCC BN S VCC A 50 GND Figure 20. Bandwidth (c) 2006 Fairchild Semiconductor Corporation NC7SB3157, FSA3157 Rev. 1.0.3 8 www.fairchildsemi.com NC7SB3157, FSA3157 -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch Physical Dimensions Figure 21. 6-Lead, SC70, EIAJ SC88, 1.25mm Wide Package Note: click here for tape and reel specifcations, available at: http://www.fairchildsemi.com/products/analog/pdf/sc70-6_tr.pdf Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. (c) 2006 Fairchild Semiconductor Corporation NC7SB3157, FSA3157 Rev. 1.0.2 9 www.fairchildsemi.com NC7SB3157, FSA3157 -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch Physical Dimensions 2X 0.05 C 1.45 B 2X (1) 0.05 C 1.00 (0.49) 5X (0.75) TOP VIEW 0.55MAX 0.05 C 0.05 0.00 C 0.25 0.15 6X 0.10 0.05 A (0.52) 1X (0.30) 6X RECOMMENED LAND PATTERN 0.10 0.00 6X CBA C 0.45 0.35 PIN 1 0.05 C DETAIL A 1.0 0.40 0.30 0.35 5X 0.25 0.40 5X 0.30 (0.05) 6X 0.5 BOTTOM VIEW (0.13) 4X 0.075 X 45 CHAMFER DETAIL A PIN 1 TERMINAL Notes: 1. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD 2. DIMENSIONS ARE IN MILLIMETERS 3. DRAWING CONFORMS TO ASME Y14.5M-1994 MAC06AREVC 6-Lead, MicroPakTM 1.0mm Wide Package Note: click here for tape and reel specifcations, available at: http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf Package drawings are provided as a service to customers considering Fairchild components. Drawings may change in any manner without notice. Please note the revision and/or date on the drawing and contact a Fairchild Semiconductor representative to verify or obtain the most recent revision. Package specifications do not expand the terms of Fairchild's worldwide terms and conditions, specifically the warranty therein, which covers Fairchild products. Always visit Fairchild Semiconductor's online packaging area for the most recent package drawings: http://www.fairchildsemi.com/packaging/. (c) 2006 Fairchild Semiconductor Corporation NC7SB3157, FSA3157 Rev. 1.0.2 10 www.fairchildsemi.com NC7SB3157, FSA3157 -- Low-Voltage SPDT Analog Switch or 2:1 Multiplexer / De-multiplexer Bus Switch www.fairchildsemi.com (c) 2006 Fairchild Semiconductor Corporation NC7SB3157, FSA3157 Rev. 1.0.3 11 |
Price & Availability of NC7SB315708 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |